◆Set/adjust discharging power according to performance parameters and detection requirements

◆Set discharging time,timing to automatic shut-off load,discharge off and alarm operator

◆Set load voltage,over/under voltage and over current protection threshold value,it can shut off load,terminate discharging and alarm user automatically.

◆Set storage datasheet recording period optionally which must be more than the minimum period 6Seconds.

◆Large screen LCD display,friendly interface,English menu,display discharge power,time,power consumption,every phase load voltage,current,frequency and inner temperature information real timly.

◆Parallel operation function to carry out multi sets load operation by RS 485 communication

◆Readjust discharg paremeters during discharging process

◆Built-in storage function,save 10 groups of test data,which can be inquired,deleted and put into flash disk.

◆Start/stop discharging control by Serial port,and detect data real time operation etc;The storage data can be uploaded to PC by serial port or flash disk,and the upper computer’s software can analyze data and pattern and print report etc.

◆Thernal protetion function,it can turn off load,terminate discharging and alarm automatically when over temperature

◆Power Fail Recovery function

◆     Set at most 10 groups power,load process automatically according to the setting power and operation time after being turned on.